Honda BF50D User Manual download pdf (Page 89)

STORAGE

If the fresh water supply is

insufficient it may be necessary

to temporarily cover the three

water intakes with duct tape as

shown on the following page.

GARDEN HOSE ADAPTER

(FLUSH KIT CPUPLER)

COOLING SYSTEM INDICATOR

Running the engine without good

water circulation can cause

overheating and water pump damage.

Distributor’s Limited Warranty

Start the engine. Monitor the

cooling system indicator. Stop the

engine if water does not come out

of the cooling system indicator and

check the fresh water supply.

Move the gearshift lever or control

lever to the N (neutral) position.

Flush the outboard motor in the

neutral position only.

Turn on the fresh water supply to

the flush kit coupler.

Damage caused by running the

outboard motor without sufficient

cooling water is not covered by the

(p. ).

Remove the sealing washer from

the wash screw and install the

sealing washer on the flush kit

coupler.

Install the flush kit coupler into the

WASH screw hole and connect a

fresh water hose to the garden

hose adapter.

119

08/02/28 10:49:34 31ZZ4600_088

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 134 135

No comments

Honda BF50D User Manual Page 89