Honda 2010 Fit User Manual download pdf (Page 306)

3. Remove the cover from the under-

hood fuse box (see page 306).

Connect one jumper cable to the

positive (＋) terminal on your

battery. Connect the other end to

the positive (＋) terminal on the

booster battery.

4. Connect the second jumper cable

to the negative (－) terminal on

the booster battery. Connect the

other end to the ground strap as

shown. Do not connect this jumper

cable to any other part of the

engine.

5. If the booster battery is in another

vehicle, have an assistant start that

vehicle and run it at a fast idle.

6. Start your vehicle. If the starter

motor still operates slowly, check

that the jumper cables have good

metal-to-metal contact.

7. Once your vehicle is running,

disconnect the negative cable from

your vehicle, then from the

booster battery. Disconnect the

positive cable from your vehicle,

then from the booster battery.

Keep the ends of the jumper cables

away from each other and any metal

on the vehicle until everything is

disconnected. Otherwise, you may

cause an electrical short.

Jump Starting

300

1 2 ... 301 302 303 304 305 306 307 308 309 310 311 ... 353 354

Comments to this Manuals

No comments