Honda F200 User Manual download pdf (Page 21)

Spark Plug Service

Recommended spark plug: BMR-4A (NGK),

W14MR-U (ND) To ensure proper engine operation,

the spark plug must be properly gapped and free of

deposits.

1. Clean any dirt from around the spark plug base.

2. Remove the plug cap and use the wrench to re-

move the spark plug.

3. Visually inspect the spark plug. Discard it if the

insulator is cracked or chipped.

4. Measure the plug gap with a feeler gauge. The gap

should be 0.6-0.7 mm (0.024-0.028 in). Correct

as necessary by bending the side electrode.

5. Attach the plug washer. Thread the plug in by

hand to prevent cross-threading.

6. Tighten a new spark plug l/2 turn with the

wrench to compress the washer. If you are

reusing a plug, it should only take l/8-1/4 turn

after the plug seats.

CAUTION:

The spark plug must be securely tightened. An

improperly tightened plug can become vev hot

and possibly damage the tiller.

Never use a spark plug with an improper heat

range.

(1) Spark plug wrench

(2) 0.6-0.7 mm (0.024-0.028 in)

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 29 30

No comments

Honda F200 User Manual Page 21