Honda HS621 User Manual download pdf (Page 29)

Scraper inspection, adjustment and replacement

If the auger housing guard and the scraper are deformed or improperly

adjusted, the snowthrower will not clear the snow evenly. The

snowthrower should be inspected and adjusted, and any faulty parts

should be replaced.

To Prevent accidental starting, turn the engine switch to the OFF position

and disconnect the spark plug cap.

Inspection:

1. Place the snowthrower on firm, level

ground and check that the scraper

blade contacts the ground evenly.

Adjust the scraper blade if it does not

contact the ground evenly.

2.Check that the auger paddle ground

clearance:

O-2 mm (O-0.08 in)

3,Replace the scraper blade if the

service limit is exceeded.

PADDLE GROUND CLEARANCE:

O-2 mm (O-0.08 In1

Adjustment

Adjust auger paddle ground clearance by repositioning the scraper.

1. Drain the fuel tank as described on page 36 , Turn the fuel valve to the

OFF position.

. Gasoline is extremely flammable and is explosive under certain

conditions.

Spilled fuel or fuel vapor may ignite. If any fuel is spilled, make sure the

area is dry before starting the engine.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 43 44

No comments

Honda HS621 User Manual Page 29