Honda 2008 Civic Sedan User Manual download pdf (Page 250)

Open the trunk.

Remove the socket from the

headlight assembly by turning it

one-quarter turn counterclockwise.

Use a flat-tipped screwdriver to

remove the two holding clips from

the inner fender, and pull the inner

fender cover back.

Remove the bulb from the socket

by pushing the bulb in and turning

it counterclockwise until it unlocks.

Remove the screw from the center

of each fastener on the side of the

trunk lining. Pull the lining back.

Determine which of the four bulbs

is burned out: stop/taillight, back-

up light, turn signal, or side

marker.

Install the new bulb in the socket.

Turn it clockwise to lock it in place.

Insert the socket back into the

headlight assembly. Turn it

clockwise to lock it in place.

Test the lights to make sure the

new bulb is working.

Reinstall the inner fender cover.

Then reinstall the holding clips,

andlocktheminplacebypushing

on their centers.

1.

4.

5.

6.

7.

8.

3.

2.

2.

CONTINUED

Replacing Rear Bulbs

(In Fenders)

Lights

Maintenance

247

FASTENER

FASTENER

０７／０７／０３２１：１５：１９３１ＳＮＡ６２００２５２

2008 Civic Sedan

Table Of Contents

Main Menu

1 2 ... 245 246 247 248 249 250 251 252 253 254 255 ... 323 324

Comments to this Manuals

No comments