Honda FG110 User Manual Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
8
SERVICING YOUR TILLER
Proper maintenance is essential for safe, economical, and
trouble-free operation. It will also help reduce air pollution.
To help you properly care for your tiller, the following pages include a
maintenance schedule, routine inspection procedures, and simple
maintenance procedures using basic hand tools. Other service tasks
that are more difficult, or require special tools, are best handled by
professionals and are normally performed by a Honda technician or
other qualified mechanic.
The maintenance schedule applies to normal operating conditions. If
you operate your tiller under severe conditions, such as sustained
high-load or high-temperature operation, or use in unusually wet or
dusty conditions, consult your servicing dealer for recommendations
applicable to your individual needs and use.
Remember that an authorized Honda servicing dealer knows your
tiller best and is fully equipped to maintain and repair it.
To ensure the best quality and reliability, use only new, Honda
Genuine parts or their equivalents for repair and replacement.
Maintenance, replacement, or repair of the emission control
devices and systems may be performed by any engine repair
establishment or individual, using parts that are “certified” to
EPA standards.
MAINTENANCE SAFETY
Some of the most important safety precautions follow. However, we
cannot warn you of every conceivable hazard that can arise in
performing maintenance. Only you can decide whether or not you
should perform a given task.
Safety Precautions
Make sure the engine is off before you begin any maintenance or
repairs. This will eliminate several potential hazards:
Carbon monoxide poisoning from engine exhaust.
Operate outdoors away from open windows or doors.
Burns from hot parts.
Let the engine and exhaust system cool before touching.
Injury from moving parts.
Do not run the engine unless instructed to do so.
Read the instructions before you begin, and make sure you have
the tools and skills required.
To reduce the possibility of fire or explosion, be careful when
working around gasoline. Use only a nonflammable solvent, not
gasoline, to clean parts. Keep cigarettes, sparks, and flames away
from all fuel-related parts.
MAINTENANCE SCHEDULE
1. For professional commercial use, log hours of operation to
determine proper maintenance intervals.
2. Service more frequently when used in dusty areas.
3. These items should be serviced by an authorized Honda servicing
dealer, unless you have the proper tools and are mechanically
proficient.
Failure to follow this maintenance schedule could result in
non-warrantable failures.
B WARNING
Improper maintenance, or failure to correct a problem
before operation, can cause a malfunction in which you
can be seriously hurt or killed.
Always follow the inspection and maintenance
recommendations and schedules in this owner’s manual.
B WARNING
Failure to properly follow maintenance instructions and
precautions can cause you to be seriously hurt or killed.
Always follow the procedures and precautions in this
owner’s manual.
Interval
1
Item
Before each use
Check the engine oil level (page 9)
Check the air filter (page 10)
Check throttle cable (page 12)
Check the nuts and bolts for tightness
First month or
10 hours
Change the engine oil (page 9)
Every month or
10 hours
Clean the air filter
2
(page 10)
Every 3 months or
25 hours
Check the transmission grease (page 14)
Every 6 months or
50 hours
Change the engine oil
2
(page 9)
Check the cooling fins (page 11)
Check the clutch shoes
3
Every year or
100 hours
Change the engine oil
2
(page 9)
Check the spark plug (page 11)
Clean the spark arrester (optional) (page 11)
Clean the fuel tank and filter (page 13)
Every 2 years or
after each 300
hours
Replace the spark plug (page 11)
Adjust the valve clearance
3
Adjust the idle speed (page 12)
3
Clean the combustion chamber
3
Check the fuel tubes (page 13)
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Comments to this Manuals

No comments