Honda FS7054 User Manual download pdf (Page 20)

MAINTENANCE & ADJUSTMENTS

Drive Chain Slack

Loosen the bolt securing the adjustment roller

the roller is free to drop down. The chain should

have approximately 1/2-inch

of slack at the location

shown. After adjustment, tighten bolt securely.

Premature chain, roller and sprocket wear will result

the chain is run without enough slack.

the chain slack cannot be adjusted with the roller

all the way down, remove the 1/2-link

and re

check

slack. Always install a new master link with the

retaining clip positioned as shown.

If proper chain slack cannot be achieved with the

1/2-link

removed and the roller all the way down,

replace the chain.

Gear

Box

Put the sweeper on a level surface.

1. Remove the two wing nuts and left access cover.

2. Use a

114

inch allen wrench and remove the oil

The oil should flow out the plug hole.

not, fill

4. Install the oil check plug and tighten it securely.

5. Install the access cover.

check plug.

with the recommended oil.

Recommended

oil:

4 or GL

5 80w90 gear oil

Deck

Belt

Refer to the mid

size commercial mower owner's

manual or shop manual for additional details and

illustrations.

Removal

1. Move the blade control to the

OFF

position.

Angle the sweeper 25

left.

Remove the right access cover.

4. Angle the sweeper 25

right.

5. Remove the left access cover.

Loosen the belt

guide bolts on the power unit.

These are accessible from the top of the power

unit. Loosen belt guide on idler pulley.

Remove the belt.

Installation

ADJUSTMENT ROLLER 1/2-LINK

Reverse of removal.

FS7054 SWEEPER

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 39 40

Comments to this Manuals

No comments

Honda FS7054 User Manual Page 20

Comments to this Manuals

Related products and manuals for Lawnmowers Honda FS7054