Honda HRB215 User Manual download pdf (Page 63)

MAINTENANCE & ADJUSTMENTS

Blade Removal and Installation

If you remove the blade(s) for sharpening or replacement, you

will need a torque wrench for installation. Wear heavy gloves to

protect your hands.

BLADE SHARPENING: To avoid weakening the blade(s), or

causing imbalance or poor cutting, the blade(s) should be

sharpened by trained staff at an authorized Honda lawn mower

dealer.

BLADE REPLACEMENT: Use genuine Honda replacement

blades or their equivalent.

Blade Removal

1. With the throttle lever in the STOP position and the spark plug

cap disconnected, tilt the mower to the right side, so the

carburetor side is up. This will help to prevent fuel leakage and

hard starting due to carburetor flooding.

2. Remove the two blade bolts with a 14 mm socket wrench. Use

a wooden block to prevent the blade(s) from turning when

removing the bolts.

3. Remove the blade(s) from the blade control assembly.

UPPER MULCHING BLADE

(standard for HRM215)

(not used with high-lift blade)

BLADE BOLT (2)

LOWER MULCHING BLADE

1 t;andard for HRM215)

SPECIAL WASHER (2) HIGH-LIFT BLADE

(standard for HRB215)

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 88 89

No comments

Honda HRB215 User Manual Page 63