Honda HRC7018 User Manual download pdf (Page 68)

MAINTENANCE &ADJUSTMENTS

5. Install the linchpin(s) in the

adjusting bar. Place the

1 l/i

adjusting lever in its storage

position and secure it with

31~~

its spring pin.

4’/2

a’/2

Cutting Range

5’/2

To change the cutting range

of your mower you will reposition the front caster wheels on

the mower deck and change the drive axle pivot position on

the power unit.

Always shut off the engine and remove the key before

changing the cutting range.

Front Cutting Range Adjustment

1. Raise and support the front of the mower deck.

2. Remove the 4 bolts holding the caster wheel assembly to the

mower deck.

3. Reinstall the caster wheel

assembly in the alternate set

of holes.

Upper 4 holes = Low Range.

Lower 4 holes = High Range

4. Repeat the procedure for the

other caster wheel and lower

the deck to the ground.

5. Tighten the 4 bolts on each

caster wheel assembly to

31 ft-lb (42 Nom).

(LOW RANGE SHOWN)

6. Follow the procedures for Front Wheel Adjustment (page 58)

to set the desired cutting height.

7. Lower the mower deck to the ground.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 99 100

No comments

Honda HRC7018 User Manual Page 68