Honda IGX440 User Manual download pdf (Page 15)

−

−

−

ENGLISH

ENGINE WILL

NOT START

Possible Cause Correction

TECHNICAL INFORMATION

Serial Number Location

ENGINE LACKS

POWER

Possible Cause Correction

TECHNICAL INFORMATION

ELECTRIC STARTER

(applicable types)

SERIAL NUMBER &

ENGINE TYPE LOCATION

SERIAL NUMBER &

ENGINE TYPE LOCATION

STANDARD TYPES

LOW PROFILE TYPES

ELECTRIC STARTER

(applicable types)

15

Record the engine serial

number, engine type, and date

of purchase in the space below.

You will need this information

when ordering parts and when

making technical or warranty

inquiries.

Battery

discharged.

Fuse burnt out.

Choke open.

(Recoil starter

types)

Engine switch

OFF.

Engine oil level

low.

Out of fuel.

Bad fuel; engine

stored without

treating or

draining

gasoline, or

refueled with

bad gasoline.

Spark plug faulty,

fouled, or

improperly

gapped.

Spark plug wet

with fuel

(flooded engine).

Fuel filter

restricted,

carburetor

malfunction,

ignition

malfunction,

valves stuck, etc.

Electric

starting

(applicable

types):

Check battery

and fuse.

Check control

positions.

Check engine

oil level.

Check fuel.

Remove and

inspect spark

plug.

Take engine to

an authorized

Honda

servicing

dealer, or refer

to shop

manual.

Check air filter.

Check fuel.

Take engine to

an authorized

Honda

servicing

dealer, or refer

to shop

manual.

Filter element(s)

restricted.

Bad fuel; engine

stored without

treating or

draining

gasoline, or

refueled with

bad gasoline.

Fuel filter

restricted,

carburetor

malfunction,

ignition

malfunction,

valves stuck, etc.

Date Purchased: ______ / ______ / ______

Engine type: ___ ___ ___ ___

Engine serial number: __ __ __ __ __ __ __ __ __ __ __

Recharge battery.

Replace fuse.

(p. 12).

Move choke lever

to CLOSED

position unless the

engine is warm.

Turn engine switch

to ON position.

Fill with the

recommended oil

to the proper level

(p. 8 9).

Refuel (p. 7).

Drain fuel tank and

carburetor (p. 14).

Refuel with fresh

gasoline (p. 7).

Gap or replace

spark plug (p. 11).

Dry and reinstall

spark plug. Start

engine with

throttle lever in

MAX. position.

Replace or repair

faulty components

as necessary.

Clean or replace

filter element(s)

(p. 9 10).

Drain fuel tank and

carburetor (p. 14).

Refuel with fresh

gasoline (p. 7).

Replace or repair

faulty components

as necessary.

1.

2.

3.

4.

5.

1.

2.

3.

6.

07/06/21 11:47:07 32Z3S600_015

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 71 72

Comments to this Manuals

No comments