Honda 2-DOOR DX User Manual download pdf (Page 12)

PRELIMINARY

53. Get the AC clutch relay from the kit. Insert the

relay in its slot in the fuse box.

54. Reinstall all removed parts (radiator cover,

bumper, cowl plate, cowl cover and windshield

washer hose, battery cable). Observe illustration

below for proper orientation of radiator cover.

55. Hook up the system to an aircon charging station.

56. Evacuate the system for at least 15 minutes.

57. Reset radio station presets.

58. Install the labels under the hood at a cleaned

location near the emission label.

• For USA Registered Vehicles: Aircon INFO-

Label and either of the A/C Kit I.D.-Labels

• For USA Registered Vehicles: USA A/C Kit

Identification Label

For 4-Door Label displaying 80000-SNA-Y00

For 2-Door Label displaying 80000-SVA-Y00

• For Canada Registered Vehicles: Aircon R134a-

Label

NOTE: If after 15 minutes the pressure has not

reached down to 93.3kPa (700 mmHg, 27.6InHg),

there is probably a leak in the system. Using a leak

detector (Honda Tool & Equipment YGK-H-10PM) find

and repair the leak.

59. Charge the system and check system

performance. Be sure to add the same amount

of NEW refrigerant oil to the system as that was

removed during the evacuation procedure(s).

60. Refrigerant leak test.

61. System performance test. With the charge station

hoses connected, run the A/C system

performance Test per the 2006 Civic Service

Manual.

1 2 ... 7 8 9 10 11 12

No comments

Honda 2-DOOR DX User Manual Page 12